top of page
Standard Series - Brushed Finish - 1 1/4"
The standard straight grab bar is perfect for residential or commercial settings. This is our most popular grab bar as a result of its low cost and durable performance. This grab bar comes in various finishes, lengths, and diameters.
 
Features:
  • ADA & ANSI Compliant: 1 ½” wall clearance and supports up to 500 lbs.
  • Concealed screw design for a more decorative look.
  • Snap-on flange covers with flanges featuring multiple anchoring points to facilitate installation.
  • Mounting hardware included.
  • (Length is measured from centerline to centerline of each mounting flange. Add 3″ for overall length).
 
Construction:
  • Tubing: 20 gauge #304 stainless steel.
  • Flanges: 15 gauge #304 stainless steel with holes for attaching to wall.
  • Covers: 22/24 gauge #304 stainless steel. Round 3 inch flange covers.
  • Hardware: Includes (6) 2 inch stainless steel screws.
(Exceptions: 18 gauge tubing for all knurled finish bars and all 48″ length bars)
 
Caution:
  • A grab bar is only as strong as the anchoring devices and the wall on which it is mounted to.
  • For ADA Compliance, follow ADA Placement Guidelines.
  • Do not subject the grab bar to harsh cleaning chemicals. Use soap and water, sponge the surface, then rinse and wipe dry. Read the Grab Gar Cleaning Guide.

Standard Series - Brushed Finish - 1 1/4"

$34.99Price

  • How do you clean grab bars?

    Cleaning grab bars is very easy. Grab bars should regularly be cleaned to maintain a new appearance and a sanitary environment. Follow these steps to clean and maintain the appearance of stainless steel grab bars:

    Removing Dirt & Grime: All surfaces should be washed with a mild dish-washing liquid soap or powdered detergent, ammonia, and warm water. Use a soft cloth. The material should then be rinsed with clear water and wiped with a damp sponge and dried.

    Removing Smears & Fingerprints: Use Arcal 20, Lac-O-Nu, Lumin Wash, O’Cedar Cream Polish or Stainless Shine. Rub the surface with a cloth as directed on the package.

    Removing Rust: If you need to remove rust from grab bars, please read our removing rust on grab bars instructions.

    Disclaimer:

    The use of severe chemicals, such as muriatic acid or other caustic chemicals, may cause permanent damage to all stainless steel grab bar surfaces. Muriatic acid (for cleaning masonry) or similar hydrochloric acid-type cleaners must immediately be neutralized and scrubbed off with clean water if splashed, sprayed, spilled or otherwise in contact with a stainless steel component

    Under no circumstances should the following agents be used on stainless steel grab bars:

    - Abrasive powders or scouring pads.

    - Toilet bowl cleaners.

    - Ceramic tile cleaners.

    Solutions containing aggressive acid, such as Lime-A-Way, Soft Scrub, Tilex, etc.

bottom of page